Radio operation
• Radio reception is only available when the unit is powered by the
rechargeable battery.
• In clock mode press the
FUNCTION
button to choose the radio mode.
• For FM reception, extend the telescopic antenna.
• To adjust the frequency step by step press repeatedly the
TUNE/
or
/TUNE
buttons. For automatic search of a station, press and
hold
the
TUNE/
or
/TUNE
buttons; the unit will look for the next available
station and start its broadcast. Repeat the operation to search more
stations.
• To save a station, press the
MEM/REP
button. The memory position will
link. Press the
MEM-UP/MEM-DN
buttons to select a memory position, then
the
MEM/REP
button to save the current station under the selected number.
You can store maximum 20 stations in the memory.
•
Hold the MEM/REP
button for 2 seconds, it will scan and save all the
available stations automatically.
• During program saving, if no button is pressed within several seconds, the
unit will return to normal radio mode.
• To call a saved station, press the
MEM-UP/ MEM-DN
buttons.
• To adjust volume, in radio mode press repeatedly the
VOL+/VOL−
buttons.
• To switch off the radio, press the
POWER
button for 2 seconds.
USB/SD/MMC operation
Connecting USB/SD/MMC
• Insert a USB device into the USB port or insert a memory card into the
memory card slot. Press the
FUNCTION
button to enable USB or
SD/MMC mode. The unit will start reading the device,
READ
will be
displayed. If no device is detected,
NO
will be displayed.
• If the MP3 files are detected in the storage device, it will start playing the
first track on the device. During playback, the display shows the total
number of tracks, currently playing track number, playback time and
equalizer mode. If no tracks are found in the storage device,
NULL
will be
displayed.
Playback operations
• During playback press the
button to pause playback. Press this button again to resume playback.
• During playback press the
TUNE/
or
/TUNE
buttons to go to previous or next track.
• During playback press the
STOP
button to go to clock mode.
• To adjust volume, press repeatedly the
VOL+/ VOL−
buttons.
• During playback press the
ALARM/EQ
button to select equalizer mode:
Normal - Classic - Bass - Live - Rock
.
The mode will be displayed blinking.
• During playback, press the
MEM/REP
button to select playback mode:
Shuffle - Repeat One - Repeat All
.
• Press
SET
button to confirm.
• In play mode selection, if no button is pressed within several seconds, the unit will return to normal playback mode.
General USB/SD/MMC notes
• This unit is equipped with a USB socket that can accept and play MP3 files stored on standard USB flash
(compatible with USB version 2.0) up to 32 GB.
• This unit is also equipped with an SD/MMC card socket that can accept and play MP3 files stored on standard
SD/MMC cards up to 32 GB.
• Always switch off the unit or change mode to another one before removing a USB flash drive or SD/MMC card, to
prevent damage to your USB device or memory card.
Note:
Although this product is fully compatible with USB 2.0 and SD/MMC card standard formats, a small percentage
of USB flash drives and SD/MMC cards might not be readable, due to those device manufacturers’ non-compliance
with the full (official) USB and SD/MMC card standards.
• FAT32 file system is supported by USB and SD/MMC of this unit.
ALARM operation
Setting the Alarm
• Press and hold
ALARM
button, then press repeatedly
ALARM
button to go to setting of parameters in following
sequence: alarm hour => alarm minute => alarm sound (OFF/BUZ/FM/USB/CARD). The selected parameter will
blink meaning readiness for adjustment.
• Press the
TUNE/
button to adjust the parameter up. Press the
/TUNE
to adjust the parameter down.
• In alarm time setting mode, if no button is pressed within 10 seconds after a parameter is selected, the unit will
automatically return to clock mode.
• Do not select USB or SD as alarm signal if no USB device or SD/MMC card is connected, otherwise the alarm will
not work.
Alarm switch off and Snooze
• When the alarm signal is on, press the
SNOOZE
button to
interrupt the alarm signal for 5 minutes. After 5 minutes the
alarm sound will go on again.
• When the alarm signal is on, press the
ALARM
button to switch
off the alarm sound completely.
Sleep timer
• Sleep Timer allows you to listen to the radio/music while you fall
asleep.
• Press the
SLEEP/SNOOZE button
to set the sleeping time,
repeatedly press to change the sleeping time interval from 10 to
90 minutes.
• Now you can enjoy listening to the radio for the pre-set period of
sleep time. After this pre-set time has elapsed, the unit will stop
the radio/music.
AUX input
To connect an external audio device (eg. MP3-player), please use a standard stereo cable
with 3.5 mm to 3.5 mm plugs to connect the audio line-out of the external device to the AUX
input socket of this unit.
Page 3
Page 4
