Select the lowest speed to start the Mera,Micro
and Aragon EL models. With the ELB models use
the “Brush” button. Loosen the thumbscrew and
push the brush down only so far that is makes
light contact with the disc surface. Relock the arm
with the thumb screw. The arm is now in the
correct position. If the brush bristles bend and
spray cleaning fluid then you have set the brush
too close to the disc..
Wet the disc by hand using the squeeze bottle
supplied with the ELB and B models. A small
wave will form in front of the brush when you
have applie sufficient cleaning agent.
To achieve optimal cleaning results change the
direction in which the disc is rotated from time
to time.
The time required for the operation depends on
how dirty the disc is.
Hannl Reinigungssysteme Beyenburgerstrasse 21 42899 Remscheid.
T492191/842 976 ; T492191/842 977 ; E-Mail [email protected]
