4.
Front view, operative elements incl
4.1 Illustration:
Before operating you must bring the power switch to the
EIN
position, that, looking from the
front, is located at the rear right under the device.
Press the standby key to activate the standby mode of your device.
Tip: When you have finished the cleaning procedure set the PROGRAMME
SELECTION SWITCH to the
STOP
Position. After having used your device, the
installed fan might conduct damp air away up to 10 minutes. Then, aprox. 10 minutes
later your device will automatically shut down and go into standby mode.
The programme selection switch allows you to select between
„LEFT“
,
„LIQUID“
,
„RIGHT“
,
„VACUUM“, ,,AUTO-R”.
Hannl Reinigungssysteme Beyenburgerstrasse 21 42899 Remscheid.
T492191/842 976 ; T492191/842 977 ; E-Mail [email protected]
