Hanna HI 96711 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

Hanna HI 96711 Скачать руководство пользователя страница 12

12

CALIBRATION MODE MESSAGES

This prompt appears each time the meter enters calibration mode.
The meter is ready for a new calibration and asks for zero
measurement.

This indicates that the meter was not calibrated by the user.

This prompt appears for one second at the end of a new calibration
to indicate that the new calibraton has been stored.

A confirmation of the factory calibration is selected.

This indicates that the user calibration was deleted.

“Error”: the concentration of the used calibration solution is not
correct. Repeat the

calibration procedure

with the right standard

solution, and verify it is not expired. If the calibration procedure
fails again, contact your dealer or the nearest Hanna Customer
Service Center.

LOGGING MODE MESSAGES

The blinking “READ TAG” indicates that the meter asks to read the
tag for identification of the sampling location.

Note

: If the tag is not read within 20 seconds, the logging procedure

is canceled.

A record is stored without identification of the sampling location.

Indicates that the memory is full and no other record can be
stored.

LOG RECALL MODE MESSAGES

This prompt appears when entering recall data. The records number
appear on the primary display.

«
...
10
11
12
13
14
...
»

Содержание HI 96711





























Отзывы:

Нет отзывов