Hanna Instruments HI98193 Скачать руководство пользователя страница 16

Страница: 16 / 64

BOD Parameters:
•

Bottle ID:

a number used to identify a specific bottle.

Range: 0000 to 9999.
•

The type of the Sample:

Sample or Seed.

•

Bottle Volume:

the total volume of the BOD bottle.

Range: 0.1 to 300.0 mL.
•

Sample Volume:

the volume of sample in the BOD bottle.

Range: 0.1 to 300.0 mL (for a seed sample this value is 0.0 mL and cannot be set).
•

Seed Volume:

the volume of seed in the BOD bottle.

Range: 0.0 to 300.0 mL.
Press

Prev/Next

to select a different parameter on the screen.

Press

keys to modify the selected parameter’s value.

Press

Save

to save the BOD parameters and the initial DO, temperature, pressure and salinity values

for the specified bottle.

If a bottle with the same ID already exists, the instrument will ask for replacement confirmation.
Press

Replace

to replace the existing record, or

ESC

to return to the previous screen without replacing.

When a new record is saved the meter will display a message indicating the remaining free BOD
initial data space in %.

By pressing

View ID

a list of all the saved BOD initial data records will be displayed. The seed records

will have the symbol “

” displayed after the bottle ID.

OPERA

TIONAL GUIDE

www.tools.in.th

www.neonics.co.th

Содержание HI98193

































































Результаты поиска

Содержание HI98193

Отзывы:

Hanna Instruments HI98193, Инструкция по эксплуатации, Страница: 16 / 64

Результаты поиска

Содержание HI98193

Отзывы: