Hanna Instruments HI97771 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 36

Hanna Instruments HI97771 Скачать руководство пользователя страница 7

7

DESCRIPTION

5. DESCRIPTION

5.1. GENERAL DESCRIPTION & INTENDED USE

The

HI97771

is an auto-diagnostic portable photometer that benefits from Hanna’s

years of experience as a manufacturer of analytical instruments. It has an advanced
optical system that uses a Light Emitting Diode (LED) and a narrow band interference
filter that allows for accurate and repeatable readings.
The optical system is sealed from outside dust, dirt and water. The meter uses an
exclusive positive-locking system to ensure that the cuvettes are placed into the holder
in the same position every time.
With the CAL Check™ functionality, users are able to validate the performance of the
instrument at any time and apply a user calibration (if necessary). Hanna Instruments
CAL Check cuvettes are made with NIST traceable standards.
The built-in tutorial mode guides users step-by-step through the measurement
process. It includes all steps required for sample preparation, the required reagents
and quantities.
The

HI97771

meter measures free chlorine from 0.00 to 5.00 mg/L (ppm) and total

chlorine from 0 to 500 mg/L (ppm).
The method for free chlorine is an adaptation of US EPA Method 330.5, DPD Colori-
metric Method.
The method for total chlorine is an adaptation of Standard Methods for Examination of

Water and Wastewater, 20

th

Edition, 4500-Cl.

The

HI97771

photometer is a compact and versatile meter suitable for field or bench

measurements, featuring a:
• Sophisticated optical system
• Meter validation using certified CAL Check cuvettes
• Tutorial mode guides the user step-by-step
• Auto logging
• Waterproof IP67, floating case
• GLP features

«
...
5
6
7
8
9
...
»

Содержание HI97771





































Отзывы:

Нет отзывов