Hanna Instruments HI97106 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 28

Hanna Instruments HI97106 Скачать руководство пользователя страница 3

3

Preliminary Examination

1. PRELIMINARY EXAMINATION

Remove the instrument and accessories from the packaging and examine it carefully. For further assistance,
please contact your local Hanna Instruments

®

office or email us at [email protected].

Each

HI97106

is supplied with:

•  Adapter for 16 mm vial
•  1.5V AA Alkaline batteries (3 pcs.)
•  Quick reference guide with instructions for manual download and instrument quality certificate

Note

: Save all packing material until you are sure that the instrument works correctly. Any damaged or defective

item must be returned in its original packing material with the supplied accessories.

2. SAFETY MEASURES

• The chemicals contained in the reagent kits may be hazardous if improperly handled.
• Read the Safety Data Sheets (SDS) before performing tests available on

sds.hannainst.com

.

• Safety equipment

Wear suitable eye protection and clothing when required, and follow instructions carefully.

• Reagent spills

If a reagent spill occurs, wipe up immediately and rinse with plenty of water. If reagent
contacts skin, rinse the affected area thoroughly with water. Avoid breathing released vapors.

• Waste disposal

For proper disposal of reagent kits and reacted samples, contact a licensed waste disposal
provider.

«
1
2
3
4
5
...
»

Содержание HI97106





























Отзывы:

Нет отзывов