13
MEASUREMENT PROCEDURE
4. Remove sample from the sample well by absorbing with a soft tissue.
5. Using a plastic pipette, rinse prism and sample well with distilled or
deionized water. Wipe dry. The instrument is ready for the next sample.
Note: The last measurement value will be displayed until the next
sample is measured or the instrument is turned off. Temperature will be
continuously updated.
The ATC tag blinks and automatic temperature compensation
is disabled if the temperature exceeds the 10.0-40.0
°
C/
50.0-104.0
°
F range.
3. Press the
READ
key. The result is displayed in units of °Baumé.
