15
14
ACCESSORIES
Hanna Instruments reserves the right to modify the design, construction
and appearance of its products without advance notice.
Before using this product, make sure it is entirely suitable for your specific
application and for the environment in which it is used.
Any variation introduced by the user to the supplied equipment may degrade
the meters' performance. For yours and the meter's safety do not use or store
the meter in hazardous environments.
Note:
To clean the meters, do not use aggressive detergents. It is recom-
mended to use water.
K-TYPE THERMOCOUPLE PROBES
with integral handle, 1 m (3.3') cable & mini-connector:
HI766A
Roller surface probe, max 320 °C/600 °F
HI766B
Surface probe, max 650 °C/1200 °F
HI766B1
90º Surface probe, max 450 °C/840 °F
HI766B2
Spring-loaded
,
surface probe, max 900 °C/1650 °F
HI766B3
Spring-loaded, small surface probe with insulated shaft,
max 200 °C/390 °F
HI766C
Penetration probe, max 900 °C/1650 °F
HI766C1
Ultra-fast Penetration probe, max 300 °C/570 °F
HI766D
Air probe, max 300 °C/570 °F
HI766E1
General purpose probe, max 900 °C/1650 °F
HI766E2
General purpose probe, max 900 °C/1650 °F
HI766F
High temperature, flexible wire probe without handle, max
1100 °C/2000 °F
HI766F1
Flexible wire probe w/o handle, max 480 °C/ 900 °F
HI766TR1
Penetration probe, max 250 °C/482 °F
HI766TR2
Penetration long probe, max 250 °C/482 °F
HI766TV1
Pipe clamp probe, max 200 °C/390 °F
with detachable handle & mini-connector
(to be used in conjunction with the HI766HD probe handle):
HI766PA
Roller surface probe, max 320 °C/600 °F
HI766PB
Surface probe, max 650 °C/1200 °F
HI766PC
Penetration probe, max 900 °C/1650 °F
HI766PD
Air probe, max 300 °C/570 °F
HI766PE1
General purpose probe, max 900 °C/1650 °F
HI766PE2
General purpose probe, max 900 °C/1650 °F
grill surface probe:
HI766B4
Grill surface probe with 70 cm (27.6’’) cable (protect-
ed with stainless steel jacket), max 250 °C/482 °F
HI766B4S
Spare stainless steel sensor for HI766B4 probe
OTHER ACCESSORIES
HI710009
Blue rubber boot
HI710031
H
ard carrying case
HI766EX
Extension cable for K-type probes
HI766HD
Rugged thermocouple probe handle with 1m (3.3') cable
fitted with mini-connector
WARRANTY
All Hanna Instruments meters are warranted for two years against
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions. The probes are
warranted for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accidents, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, please contact your local Hanna Instruments Office.
If under warranty, report the model number, date of purchase, serial
number and the nature of the failure.
First obtain a Returned Goods Authorization number from the Customer
Service department, then return the instrument with the Authorization
number included along with shipment costs prepaid.
If the repair is not covered by the warranty, you will be notified of
the charges.
When shipping any instrument, make sure it is properly packaged for
complete protection.
RECOMMENDATIONS FOR USERS
