background image

4

A B B R E V I A T I O N S

A B B R E V I A T I O N S

A B B R E V I A T I O N S

A B B R E V I A T I O N S

A B B R E V I A T I O N S

NTU

Nephelometric Turbidity Units

FAU

Formazin Attenuation Units

FNU

Formazin Nephelometric Units

ISO

International Organization for
Standardization

LCD

Liquid Crystal Display

RTC

Real Time Clock

RH

Relative Humidity

ID

Identification

EBC

European Brewery Comitee

Turbidity is the optical property that causes light to be scattered and absorbed, rather than transmitted.
The scattering of the light as it passes through a liquid is caused by the suspended solids. The higher the
turbidity, the greater the amount of scattered light. The molecules in a very pure fluid scatter light to a
certain degree, no solution will have zero turbidity.
The 

ISO 7027 Method

 specifies the key parameters for the optical system and the method to

measure the turbidity of water.
The 

HI 88713

 Turbidity bench meter is designed to meet or exceed the criteria specified by the 

ISO

7027, DIN 38404 

and 

NF EN 27027

.

The light beam that passes through the sample is scattered in all directions. The intensity and pattern
of the scattered light is affected by many variables including the wavelenght of the incident light,
particle size and shape, refractive index and color.
The optical system of the 

HI 88713

 turbidity bench meter uses an IR LED, a scattered light detector

(90

0

) and a transmitted light detector (180

0

).

PRINCIPLE OF OPERATION

PRINCIPLE OF OPERATION

PRINCIPLE OF OPERATION

PRINCIPLE OF OPERATION

PRINCIPLE OF OPERATION

The 

HI 88713

 Turbidity bench meter features G.L.P. (Good Laboratory Practice) functions that allow

traceability of the calibration conditions. The last calibration points as well as time and date
The 

HI 88713

 Turbidity bench meter has a user-friendly interface with an easy to understand,

graphical LCD. Comprehensive contextual help is available at a simple key press. All messages and
help screens are available in several languages. Furthermore, a tutorial mode guides the user step by
step through the analysis process.
The HI 88713

HI 88713

HI 88713

HI 88713

HI 88713 features a logging function that can hold up to 200 measurements in the internal

memory. Data can be viewed directly on the screen or it can be downloaded to a PC for further
analysis using the HI9200 Windows

®

 compatible software.

Содержание HI 88713

































Отзывы: