Hanna Instruments HI 84181 Скачать руководство пользователя страница 19

19

REAGENTS
HI 7076

Electrode filling solution

HI 84181-20

Reagent set for 20 tests

HI 84181-0

ISA for Potassium electrode (500 mL)

HI 84181-1

Standard 1 for Potassium electrode (500 mL)

HI 84181-2

Standard 2 for Potassium electrode (500 mL)

OTHER ACCESSORIES
HI 61014

Potassium half cell

HI 5315

Reference half cell

HI 731316

Stir bar (5 pcs.)

HI 731342

Automatic pipette 2000 µL

HI 731352

Tips for 2000 µL automatic pipette (25 pcs.)

HI 740036P

Beaker 50 mL (10 pcs.)

HI 740143

Syringe 1mL (6 pcs.)

HI 740144

Syringe tips (6 pcs.)

HI 741355P

Capilary pipette

HI 7662-T

Temperature probe

ACCESSORIES

WARRANTY

HI 84181

 is warranted for two years against defects in workmanship and materials when used

for its intended purpose and maintained according to the instructions.
This warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed maintenance is not covered.
If service is required, contact your dealer. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair is not covered by the warranty,
you will be notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a 

Returned Goods

Authorization Number

 from the 

Customer Service Department

 and then send it with

shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for
complete protection.
To validate your warranty, fill out and return the enclosed warranty card within 14 days from the
date of purchase.

Содержание HI 84181





















Отзывы: