52
3) Direct/AutoHold Reading Mode and Automatic Log
Press
and then
keys must be pressed on
front display to initiate this function. Real time continuous
measurements are on display with “AutoHold” flashing and
real time continuous logging into meter memory, until the
meter reaches the stability criteria to go into Auto Hold
mode. The stored sample logs will be marked with an “H”
to indicate the Auto Hold mode. The virtual key
returns operation to real time continuous measurements
and
stops the logging session.
4) Direct/AutoHold Reading Mode and Manual Log
Press
in order to add one new record in the log
report. The manual log is working even if it is in Auto Hold or Continuous reading mode. Press
to initiate the Auto Hold event. “AutoHold” will flash until the stability criteria is reached
and then the screen freezes in Auto Hold mode, the data is marked with an “H”.
5) Direct/AutoHold Reading Mode and Auto Hold Log
Press
and then
keys to initiate and automate the capture of stable data which is
stored in the Recall Manual Log file. During the process, “AutoHold” will flash until the stability
criteria is reached and then the screen freezes in Auto Hold mode, the data is logged and marked
with an “H”. The virtual key
returns operation to Real time continuous measurement.
Press
again to log a second stable data point. The lot ID along with the record index will
appear for short time on the top/left corner on the selected channel window, every time a record
will be added to the lot.
LOG RECALL
This feature allows the user to view all stored data. If no
data were logged, the “No records were found.” message
will be displayed on the LCD in the Log Recall screen.
Otherwise, the instrument will display all the memorized
lots in accordance with the selected option: Automatic Log,
Manual Log or OUR/SOUR Reports.
To view the memorized data:
• Press
while in Measure mode.
• Press
and then select the log report type.
LOGGING
