manualshive.com logo in svg

Hanna Instruments HI 504920, Инструкция по эксплуатации, Страница: 14 / 15

Поделиться
Скачать
Hanna Instruments HI 504920 Скачать руководство пользователя страница 14

27

26

CE DECLARATION OF CONFORMITY

Recommendations for Users

Before using this product, make sure that it is entirely suitable for the environment in which it is used.

Operation of this instrument in residential area could cause unacceptable interferences to radio and TV
equipments, requiring the operator to take all necessary steps to correct interferences.

The glass bulb at the end of the electrode is sensitive to electrostatic discharges. Avoid touching this glass
bulb at all time.

During calibration of instrument, ESD wrist straps should be worn to avoid possible damage to the electrode
by electrostatic discharge.

Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC
performance.

To avoid electrical shock, do not use these instruments when voltages at the measurement surface exceed
24VAC or 60 VDC.

To avoid damages or burns, do not perform any measurement in microwave ovens.

ORP PRETREATMENT SOLUTIONS

HI 7091L

Reducing Pretreatment solution, 500 mL bottle

HI 7092L

Oxidizing Pretreatment solution, 500 mL bottle

ELECTRODES

HI 62920

pH electrode with built-in temperature sensor, matching pin,
Titanium-body, DIN connector & 2m (6.6') cable

HI 32920

Combination ORP/Pt electrode, Titanium-body with DIN con-
nector & 2m (6.6') cable

HI 3619D

Combination ORP/Pt electrode, glass-body, single junction,
with DIN connector & 1m (3.3') cable

HI 3620D

Combination ORP/Pt electrode, plastic-body, single junction,
gel-filled, with DIN connector & 1m (3.3') cable

OTHER ACCESSORIES

HI 7920

HI 504910 interface cable

HI 710005

115 Vac to 12 Vdc power adapter, US plug

HI 710006

230 Vac to 12 Vdc power adapter, European plug

HI 710031

Rugged carrying case

HI 76405

Electrode holder

HI 8427

pH and mV simulator

HI 931001

pH and mV simulator with LCD display

All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner.

Hanna Instruments reserves the right to modify the design, construc-
tion and appearance of its products without advance notice.

Содержание HI 504920
















Отзывы:

Нет отзывов