manualshive.com logo in svg

Hanna Instruments HI 504901, Инструкция по эксплуатации, Страница: 32 / 35

Поделиться
Скачать
Hanna Instruments HI 504901 Скачать руководство пользователя страница 32

63

62

ACCESSORIES

HI 710005

12 VDC to 115 VAC power adapter, USA plug

HI 710006

12 VDC to 230 VAC power adapter, European plug

HI 710012

12 VDC to 230 VAC power adapter, UK plug

HI 710013

12 VDC to 230 VAC power adapter, South African plug

HI 710014

12 VDC to 230 VAC power adapter, Australian plug

HI 920010

9 to 9-pin RS232 connection cable

HI 92500

Windows

®

  Compatible Application Software

• 

Can not receive alarm SMSs regarding digital input port.

Possible causes

Wiring not correctly performed.

HI504901

 not configured to send alarm

SMSs for digital input port status.

Current status of digital input port does
not match with the one set on 

HI504901

interface.
SMS sending disabled through external
switch.

Solutions

Check if wires on digital input port are correctly
connected to 

HI504901

 supervisor.

Run 

HI504901SW

 application software and

configure

 HI504901

 for communication

with remote device.
Run 

HI504901SW

 application software and

change the options for SMS sending logic
on “digital input” window.
Enable SMS sending through external switch.

• 

Can not control digital output contact through SMS messages.

Possible causes

Wiring not correctly performed.

HI504901

 not configured to control and

send information SMSs for digital output
port status.

Interface password on SMS message not
correct or not inserted, but needed.

Solutions

Check if wires on digital output port are cor-
rectly connected to 

HI504901

 supervisor.

Run 

HI504901SW

 application software and

configure

 HI504901

 for controlling and

sending information SMSs related to digi-
tal output contact on “digital output”
window.
Insert or check the interface password on the
SMS sent.

• 

Can not receive the 

HI504901

 phone call after the recep-

tion of an alarm SMS.

Possible causes

SIM card on 

HI504901

 is not able to

make voice calls.

Solutions

Change the SIM card with one enabled
for voice calls.

Note

: Some SIM cards can be used both for

data and voice calls. Please check the
network operator for further details.

Содержание HI 504901




































Отзывы:

Нет отзывов