15
• Use
or
to select the
Date & Time option.
• Press
and use
or
to highlight the
desired option you want to modify.
• Press
to confirm your selection. Use
and
and then use
to modify the value with
or
(for
Set Date and Time option). For the
other two options press
to confirm your selection and
select one of the displayed formats with
or
.
• Press
to confirm your selection and return to the
Date
& Time options.
• Press
to return to the previous mode.
Note:
If the time is changed with more than one hour before last measure parameters user calibration, a pop-up
warning will appear on the LCD, notifying the user that a date/time conflict has occured and some time-
dependent features could work improperly (e.g.
GLP, Log).
LCD Setup
This option allows the user to set the
Contrast, the Backlight of the LCD and the Backlight Saver. The Contrast
parameter can be adjusted within 7 steps, while the
Backlight parameter within 4 steps. The Backlight Saver can
be set from 1 to 60 minutes or it can be disabled (OFF). All the changes are visible on the LCD for each parameter.
Note
: If the instrument backlight is turned off after the set period of time, press any key to turn it back on.
To set the LCD:
• Use
or
to select the
LCD Setup option;
• Press
and use
key to highlight the desired
parameter;
• Use
or
to adjust the selected parameter;
• Press
return to the
System Setup menu with saving.
