Hanna Instruments HI 255 Скачать руководство пользователя страница 10

Страница: 10 / 56

LOCK

was pressed to freeze the LCD range and the reading went out of

range, the full-scale value of the frozen range will be displayed blinking.

The EC reading is affected by temperature.

Three options of compensating temperature are available, on EC measurement

mode.

Note

: The compensation is referenced at the selected reference temperature

(see SETUP for details, page 31).

Automatic (Atc)

: The EC probe has a built-in temperature sensor; the

temperature value is used to automatically compensate the EC/TDS reading

(from 0.0 60.0 ºC).

Manual (Mtc)

: The temperature value, shown on the secondary LCD, can be

manually set with the

ARROW

keys. The ºC tag blinks when this option is active.

No Compensation (notc)

: The temperature

value is displayed, but is not taken into account

and ºC tag blinks with a higher frequency.

The reading displayed on the primary LCD is the

actual EC or TDS value. To select the desired

option, press the

ALT&ATC

keys until the option

is displayed on the LCD.

Note:

•

The default compensation mode is

Atc

•

If no temperature probe detected,

Atc

mode can not be selected

and the instrument displays ---- on the secondary LCD.

If temperature compensation is active, measurements are compensated using the

temperature coefficient (default value 1.90 %/ºC). To change the temperature

coefficient, enter the setup mode and select the tc item (see SETUP for details,

page 31). The current temperature coefficient can be quickly viewed by pressing

the

ALT&TC

keys. The value is briefly displayed on the secondary LCD.

If the temperature reading is out of 0.0 60.0 ºC interval and

Atc

option is

selected, the ºC tag will blink and the closest interval limit will be displayed.

Press the

ARROW

keys to change the displayed temperature value. This

value is used to compensate the EC/TDS reading.

TDS MEASUREMENTS

Press the

ALT&MODE

keys while in EC range. The instrument will switch to TDS

measuring range. A TDS reading will be displayed on the primary LCD and the

temperature reading on the secondary LCD.

ALT

ATC

Содержание HI 255

























































Результаты поиска

Содержание HI 255

Отзывы:

Похожие инструкции для HI 255

Бренды по названию

Популярные бренды

Hanna Instruments HI 255, Инструкция по эксплуатации

Результаты поиска

Содержание HI 255

Отзывы:

Похожие инструкции для HI 255

Бренды по названию

Популярные бренды