manualshive.com logo in svg

Hanna Instruments Groline HI981413, Инструкция по эксплуатации, Страница: 28 / 48

Поделиться
Скачать
Hanna Instruments Groline HI981413 Скачать руководство пользователя страница 28

28

SETUP

Temperature Coefficient

Option:

 The coefficient can be set between  0 to 2.4% / °C. 

A coefficient of 0.0%/°C is absolute conductivity.
Press the arrow keys to change the values. 
“TEMPERATURE COEFFICIENT” message along with the set temperature unit is scrolled on the bottom 
of the LCD screen.

Temperature Unit

Option: 

°C or °F

Press the arrow keys to change the unit.
“TEMPERATURE UNIT” message is scrolled on the bottom of the LCD screen.

   

Flow Rate Unit

Option:

 Liter/hour (L.H) or Gallon/hour (GAL.H)

Press the arrow keys to switch between the options.
“FLOW RATE UNIT” message is scrolled on the bottom of the LCD screen.

   

Languages

Option: 

Select from: En (English), ES (Spanish), Fr (French), Pt (Portuguese), nL (Dutch), dE (German)

Press the arrow keys to change the language.
“LANGUAGE” message is scrolled on the bottom of the LCD screen.

Note: 

“LANGUAGE” message, scrolled on the second line, is translated into the selected language.

Содержание Groline HI981413

















































Отзывы:

Нет отзывов