background image

2

Dear Customer,
Thank you for choosing a Hanna product. Please read this instruction
manual carefully before using the meter. This manual will provide you
with the necessary information for the correct use of the instrument. If
you need additional technical information, do not hesitate to e-mail
us at [email protected]. These instruments are in compliance
with   directives.

PRELIMINARY EXAMINATION ....... 3
GENERAL DESCRIPTION ............... 3
SPECIFICATIONS ......................... 4
PRINCIPLE OF OPERATION .......... 4
FUNCTIONAL DESCRIPTION .......... 6
GUIDE TO DISPLAY CODES .......... 7
TIPS FOR AN ACCURATE
MEASUREMENT ........................ 10
PARAMETERS REFERENCE TABLE 11
OPERATIONAL GUIDE ................ 12
ABBREVIATIONS ....................... 13
INTRODUCTION ........................ 14
SAMPLE PREPARATION .............. 17
AMMONIA LR ........................... 21
AMMONIA MR .......................... 23
AMMONIA HR ........................... 25
NITRATE LR .............................. 27

NITRATE MR ............................. 29
NITRATE HR ............................. 31
PHOSPHORUS LR ..................... 33
PHOSPHORUS MR .................... 35
PHOSPHORUS HR ..................... 37
POTASSIUM LR ......................... 39
POTASSIUM MR ........................ 41
POTASSIUM HR ........................ 43
POTASSIUM UHR ...................... 45
INTERFACE WITH PC ................. 45
STANDARD METHODS ............... 47
BATTERY REPLACEMENT ............ 47
ACCESSORIES ........................... 48
WARRANTY ............................... 49
CE DECLARATION
OF CONFORMITY ....................... 50
HANNA LITERATURE .................. 51

All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of
the copyright owner, Hanna Instruments Inc., Woonsocket, Rhode Island, 02895 , USA.

TABLE OF CONTENTS

51

Hanna publishes a wide range of catalogs and handbooks for
an equally wide range of applications. The reference literature
currently covers areas such as:

Water Treatment

Process

Swimming Pools

Agriculture

Food

Laboratory

Thermometry

and many others. New reference material is constantly being
added to the library.

For these and other catalogs, handbooks and leaflets contact
your dealer or the Hanna Customer Service Center nearest to
you. To find the Hanna Office in your vicinity, check our home
page at www.hannainst.com.

HANNA LITERATURE

Содержание C 215



























Отзывы: