24
25
ACCESORIES
REAGENT SET
HI 93701-01
Reagents for 100 Free Chlorine tests
HI 93701-03
Reagents for 300 Free Chlorine tests
HI 93711-01
Reagents for 100 Total Chlorine tests
HI 93711-03
Reagents for 300 Total Chlorine tests
OTHER ACCESORIES
HI 96701-11
CAL CHECK
TM
Standard Cuvettes for Free Chlorine (1 set)
HI 96711-11
CAL CHECK
TM
Standard Cuvettes for Total Chlorine (1 set)
HI 721310
9V battery (10 pcs.)
HI 731318
Cloth for wiping cuvettes (4 pcs.)
HI 731331
Glass cuvettes (4 pcs.)
HI 731335
Caps for cuvettes (4 pcs.)
HI 741218
Carrying case
HI 93703-50
Cuvette cleaning solution (230 mL)
BATTERY MANAGEMENT
To save battery, the instrument shuts down after 10 minutes of non-use in
measurement mode and after
1 hour of non-use in
calibration mode.
If a valid measurement was displayed before
auto shut off, the value is displayed when the
instrument is switched on. The blinking
“ZERO”
means that a new zero has to be performed.
One fresh battery lasts for around 750 measurements, depending on the light level.
The remaining battery capacity is evaluated at the instrument startup and after each measurement.
The instrument displays a battery indicator with three levels as follows:
• 3 lines for 100 % capacity
• 2 lines for 66 % capacity
• 1 line for 33 % capacity
• Battery icon blinking if the capacity is under 10 %.
If the battery is empty and accurate measurements can’t be taken anymore, the instrument
shows
“dEAd bAtt”
and turns off.
To restart the instrument, the battery must be replaced with a fresh one.
• Turn the instrument off by pressing
ON/OFF
.
• Turn the instrument upside down and remove the battery cover by turning it counterclockwise.
• Extract the battery from its location and replace it with a fresh one.
• Insert back the battery cover and turn it clockwise to close.
BATTERY REPLACEMENT
To replace the instrument’s battery, follow the steps:
Distributed by Applied Membranes, Inc.
http://www.appliedmembranes.com
Distributed by Applied Membranes, Inc.
http://www.appliedmembranes.com
