Hanlong Technology Co., Ltd Unicorn 600x User Manual Page 11 of 37
Firmware
1.0.0.29 Last Updated 8/2010
5 BASIC OPERATIONS
5.1
Understanding Unicorn Voice Prompts
Unicorn 600x has a stored voice prompt menu for quick browsing and simple configuration.
To enter the voice prompt menu, press *** on the standard analog phone connected to
any FXS port.
TABLE 5: Definitions Of The Unicorn Voice Prompts
Menu
Voice Will Say the Following:
Main
Menu
“Enter a Menu Option”
Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter 01 – 07,12 - 17, 47, 86 or 99 Menu
option
01
“DHCP Mode”, “Static IP Mode”
Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need
configure all the IP address information
through menu 02 to 05.
If user selects “Dynamic IP Mode”, the
device will retrieve all IP address
information from DHCP server
automatically when user reboots the
device.
02
“IP Address “ + IP address
The current WAN IP address is
announced Enter 12-digit new IP address
if in Static IP Mode.
03
“Subnet “ + IP address
Same as Menu option 02
04
“Gateway “ + IP address
Same as Menu option 02
05
“DNS Server “ + IP address
Same as Menu option 02
06
“MAC Address”
Announces the Mac address of the unit.
07
Preferred Vocoder
Enter “9” to go to the next selection in the
list:
z
PCM U
z
PCM A
z
G-726
z
G-723
z
G-729
12
WAN Port Web Access
Enter “9” to toggle between enable and
disable
13
Firmware Server IP
Announces current Firmware Server IP
address. Enter 12 digit new IP address.
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-hanlong-unicorn-6004
