Hanlong Unicorn 3112, Руководство пользователя

Страница: 29 / 42

Unicorn 3112 User Manual
Copyright © 2008
Hanlong Technology Co., Ltd Page 29 of 42
FXS PORT SETTING
Setting Options Meaning
Jitter Buffer Type
Select either Fixed or Adaptive based on network
conditions.
Jitter Buffer Length
Select Low, Medium or High based on network
conditions.
Distinctive Ring Tone
Default is NO.
Disable Call-Waiting
Default is NO.
Disable Call-Waiting
Tone
Default is NO. This is to disable the stutter call waiting
tone when a call waiting call arrived
Ring Timeout Incoming call will stop ringing
No Key Entry Timeout Default is 4 seconds.
Early Dial
Default is No. Use only if proxy supports 484 response
Dial Plan Prefix Sets the prefix added to each dialed number
Use # as Dial Key
This parameter allows users to configure the “#” key to be
used as the “Send” (or “Dial”) key. If set to “Yes”, pressing
this key will immediately trigger the sending of dialed
string collected so far. In this case, this key is essentially
equivalent to the “(Re)Dial” key. If set to “No”, this “#” key
will then be included as part of the dial string to be sent
out.
Dial Plan
Dial Plan Rules:
1. Accept Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d
2. Grammar: x - any digit from 0-9;
a. xx+ - at least 2 digits number;
b. xx. ?at least 2 digits number;