![background image](http://html1.mh-extra.com/html/hanit/somerset-bsb12200/somerset-bsb12200_assembly-instructions_3653494002.webp)
Notwendiges Werkzeug :: Necessary tools
Zusammenbau :: Assembly
1
2
3
Bandmaß oder Zollstock ::
Tape measure or folding rule
Schraubendreher oder Akkuschrauber :: (Cordless)
Screwdriver
Spiralbohrer Ø 6 mm ::
Twist drill Ø 6 mm
Stellen Sie die Bankfüße in einem Ab-
stand von ca. 100 cm kippsicher und
parallel zueinander auf.
Setzen Sie das Sitzelement auf die
Füße auf. Die Einleger in den Ausspa-
rungen der Füße ausrichten, Löcher
vorbohren und mit zwei Schrauben
(8x70 mm) je Seite das Sitzelement
befestigen.
Verfahren Sie bei der Montage Rü-
ckenelement entsprechend Schritt 2.
(Die Schrauben werden mit O-Rin-
gen unterlegt).
MONTAGEANLEITUNG ::
ASSEMBLY INSTRUCTIONS
2/3
DE
EN
Place the bench feet at a distance of
approx. 100 cm from each other so
that they cannot tip over and are paral-
lel to each other.
Place the seat element on your feet.
Align the inserts in the recesses of the
feet, pre-drill holes and fasten the seat
element with two screws (8x70 mm)
on each side.
When installing the back element,
proceed as described in step 2 (the
screws are underlaid with O-rings).
DE
DE
EN
EN
MALBSB12200DEEN0120
5
O-Ring
::
O-ring
6
Nummer
Name
Zeichnung
Maße
Anzahl
::
Number
:: Name
:: Drawing
:: Dimensions
:: Amount
M8
3
1
2
6
Schraube
::
Screw
6
Ø8x70 mm
6
Bit
::
Bit
1
TX40
6
1