Hanil Smart R17, Руководство по эксплуатации

Страница: 12 / 22

3. Inspection of operation
3.8 Temperature Setting
1.In standby mode, press Setup/Enter ( ) button.
2. Press Left ( ) or Right ( ) button to move to TEMP position.
4. Press the Setup/Enter ( ) button to save the settings.
3.9 Short spin mode
12 www.ihanil.com
3. Press Up ( ) or Down ( ) button to input the setting value.
1.In standby mode, long press Start/Stop ( ) button.
3.10 Fast Cool
1.In standby mode, press down ( ) button for about 2 seconds.
▶
A rotor rotates with 1,500RPM and if equipment reaches to the previously set temperature,
a rotor decelerates with very fast speed.
▶
If a rotor stops, standby mode comes up.
▶
Setting temperature is available from -10
℃ to +40℃.
▶
Centrifuge operates according to the previously set RPM.
▶
It decelerates according to the previously set Decel value after it reaches to the set RPM
and it rotates for about 2 seconds.
This function is usually used for sample which is sensitive to temperature and this also performs
Reducing the temperature of a rotor before operation.