56
e. Continue to tighten with your left hand,
hold the tensioner with your right hand,
release the lock catch, and rotate the
tensioner upward and downward several times
until it cannot be moved.
f. Pull it down to press against the steel
cylinder.
11. Precautions for use
(1) Open the stop valve at the intake end first and close the stop valve at the outlet end when the
assembly is filled with LPG; close the stop valve at the intake end after filling.
(2) The assembly should be installed firmly on the truck; the direction arrow on the end surface of the
steel cylinder should point up; the stop valves at the intake and outlet ends should be closed. Connect
the interface at the input end of the forklift truck with that at the outlet end of the assembly, screw
them in, open the stop valve at the outlet end, and check whether there is any leakage.
(3)
Check for leakage after filling with LPG and whenever the truck is used.
(4) Prevent dust ingress at the gas inlet of the intake end and rotate the dust cover straight after filling
with LPG to ensure the gas inlet check valve is tight.
(5) The opening pressure of the safety valve has been factory set and should not be changed without
permission.
(6) In case of any problem, it must be overhauled by a qualified organization, and should not be
adjusted, dismantled and repaired without permission. Faulty steel cylinders should be stored
separately.
(7) The assembly can be filled with LPG in two ways: the volume method and the gravity method. If
gravity method is used for filling, the steel cylinder needs to be placed vertically; if the volume method
is used for filling, the steel cylinder needs to be placed flat with the direction sign pointing up.
(8) Filling, transport, storage, use and inspection of the steel cylinder should be in strict accordance
with Cylinder Safety Supervision Regulations issued by the national administration of quality and
technology supervision
(9) Steel cylinders must be gently assembled and disassembled and should not collide against each
other or be subject to other external impacts. Steel cylinder combination components should be in
good condition and should not be dismantled, adjusted or replaced without permission.
(10) The steel cylinder can be filled with LPG in accordance with GB11174; the maximum filling
quantity should be no more than 80% of the steel cylinder volume.
Содержание XF Series
Страница 62: ...59 WG3800 and LPG Fuel System Diagram...
Страница 72: ...Notes...