HANGCHA CPD10J, Руководство по обслуживанию

Страница: 54 / 64

48
(3)Errors detected by drive ACS (Warning)
Code Source Condition When Tract Main PS Reset Remark
201
ACS low temp warning
ACS heat sink temp < -20
℃
KEY=ON ON ON
ON
KEY=OFF or Heat
sink temp normal Lowest Accel will be used.
202
ACS high temp warning
ACS heat sink temp > 85
℃
KEY=ON ON ON
ON
KEY=OFF or Heat
sink temp normal Lowest Accel will be used.
203
Motor high temp warning
Motor temp > 145
℃
KEY=ON ON ON
ON
KEY=OFF Lowest Accel will be used.
204
Heat sink temp sensor error ACS heat sink temp
sensor error KEY=ON ON ON
ON
KEY=OFF Lowest Accel will be used.
205
Motor low temp warning
Motor temp < -50
℃
KEY=ON ON ON
ON
KEY=OFF Lowest Accel will be used.
206
Motor temp sensor error Motor temp sensor
not connected or short circuit KEY=ON ON ON
ON
KEY=OFF or sensor
connected Lowest Accel will be used.
207
Speed feedback sensor error Speed feedback sensor
not connected / short circuit KEY=ON ON ON
ON
KEY=OFF or sensor
connected ACS can not control speed
correctly. No driving allowed.
208
ACS high voltage warning ACS voltage > 68V KEY=ON ON ON
ON
KEY=OFF or voltage
back to normal Lowest Accel will be used.
209
ACS low voltage warning ACS voltage < 22.5V KEY=ON ON ON
ON
KEY=OFF or voltage
back to normal Lowest Accel will be used.
210
ACS default values loaded Default parameters are used
in ACS KEY=ON ON ON
ON
KEY=OFF Turn the key s witch off and on again.
211
Power reduce Power is reduced (by
some warning condition) KEY=ON ON ON
ON
KEY=OFF
212
Checksum error Calibration parameter
checksum error KEY=ON ON ON
ON
KEY=OFF
213
PCB low temp warning
PCB temp <-20
℃
(onlyGEN4
，
GEN5 not )
KEY=ON ON ON
ON
KEY=OFF
214 PCB high temp warning
PCB temp > 100
℃
(only GEN4
，
GEN5 not )
KEY=ON ON ON ON KEY=OFF
215 PCB sensor error
PCB temperature sensor error
(only GEN4
，
GEN5 not )
KEY=ON ON ON ON KEY=OFF
216 Current sensor default error Current check default error KEY=ON ON ON ON KEY=OFF