HANGCHA CPD10J, Руководство по обслуживанию

Страница: 44 / 64

38
high speed easy control .
②
two archives speed and acceleration design
，
can apply to most situation.
③
regeneration technology make change direction of fork even smooth
。
④
three regenerative braking mode
：
A
、
acceleration pedal part release appear regenerative braking
，
B
、
direction reverse regenerative braking
，
C
、
ramp downslide appear regenerative braking
，
Except increase security drive
，
reclaim part of electric energy
，
prolong work time of every time .
⑤
control speed during downgrade
：
speed lie on accelerator
。
if speed exceed set point
，
controller
may automatic braking
，
this give optimal ramp.
Notice:
1 .Maintain electric control
，
must first cut off electrical source
，
then hold 10-100ohmic resistance
join controller anode and cathode
，
release residual voltage in the capacitor, or else you may meet
tip-and-run danger.
2.Magnetic and radiation have some effect to inverter
，
long time effect may mangle controller, So
need apart form magnetic and radiation.