16
Step 10
Use the radio to move the throttle to the low setting
using the stick and trim. Move the pushrod so the
carburetor is closed. Secure the pushrod wire using a
3mm x 5mm machine screw.
Step 11
Check that the throttle operates from the radio without
binding at low and high throttle. Use the ATV setting
of the radio or change the position of the clevis at the
carburetor or the pushrod connector at the servo to
eliminate any binding.
Step 12
Place the tank inside the fuselage with the vent towards
the top of the fuselage. Use the rubber bands to hold the
fuel tank in position inside the fuselage.
Step 13
Attach the lines from the fuel tank to the engine. The
green line will attach to the fuel inlet, and the red to
the muffler pressure.
Step 14
Use a 4-40 x 1/2-inch socket head screw to secure the
radio tray in the fuselage. Two trays have been supplied
with your Tango 40, so use the one with the notch at the
front that will hold the fuel tank in position.
Section 3A: Two-Stroke Engine Installation
