28
Hangar 9 Pulse 125 ARF Assembly Manual
Step 4
Use a hobby knife to trim the line coming from the clunk to
attach it to the carburetor.
Step 5
Remove the cowl and trim it using the lines made in the
previous step. With the engine back on the firewall, check to
make sure the cowl will fit over the engine. Take your time
trimming the cowl to achieve the best fit. Use a rotary tool
and sanding drum to smooth any rough edges around the
engine.
Step 6
Use the instructions provided with the engine to attach the
muffler. Trim and connect the pressure line from the fuel
tank to the muffler.
Step 7
Slide the spinner backplate on the engine shaft.
Step 8
Slide the propeller on the engine shaft. Use the hardware
provided with the engine to secure the propeller. The small
standoffs on the spinner backplate will help in aligning the
propeller.
Step 9
Secure the spinner cone to the backplate using two 3mm x
10mm self-tapping screws.
