18
Hangar 9 P-51 PTS Mk II Assembly Manual
Elevator
Connect the elevator clevis to the outside hole on the
elevator control horn.
With the radio system on, check to be sure the elevator is
aligned to the stabilizer. Center the trim lever for the elevator
on the transmitter. If the elevator and stabilizer are not
aligned, remove the clevis and thread the clevis in or out
until the elevator is aligned with the stabilizer. Attach the
clevis to the outside hole of the elevator control horn. Slide
the clevis retainer onto the clevis to secure its location.
Elevator Trim
Mode 2 Transmitter
Mode 1 Transmitter
Elevator Trim
Rudder
Connect the rudder clevis to the center hole on the rudder
control horn.
With the radio system on, check to be sure the rudder is
aligned to the fin. Center the trim lever for the rudder on the
transmitter. If the rudder and fin are not aligned, remove
the clevis and thread the clevis in or out until the rudder is
aligned with the fin. Attach the clevis to the center hole of
the rudder control horn. Slide the clevis retainer onto the
clevis to secure its location.
Rudder
Trim
Mode 2 Transmitter
