13
Required Parts
• Fuselage assembly
• Spinner assembly
• Propeller
Required Tools and Adhesives
• Adjustable wrench
• Hex wrench: 2.5mm
Step 1
Remove the plastic shipping saver, nut and washer from
the engine crankshaft.
Step 2
Check that the flywheel is fully installed on the engine. It
will fit closely to the engine when it is positioned correctly.
Slide the spinner backplate onto the engine crankshaft so
it is tight against the flywheel.
Step 3
Slide the propeller onto the engine crankshaft. The
blades of the propeller will be positioned against the
bosses for the spinner screws of the spinner backplate
as shown below.
Step 4
Slide the propeller washer onto the engine crankshaft.
Section 3: Propeller and Spinner Installation
