17
Step 5
Slide the tubes and wing panel into the holes in the
fuselage. Remove the tape from the aileron servo
extension and pass it into the fuselage.
Step 6
Press the wing snug against the fuselage. Use the
1/4-20 x 2
1
/
2
" nylon wing bolt to secure the wing
panel to the fuselage.
Step 7
Pass the aileron servo extension back and under the
wing tube. The connector end of the extension then
goes through the servo lead retainer. The wire will fit
into the notch in the retainer. Plug the connectors
together and slide the retainer against the connectors
to secure them together.
Step 8
Slide the remaining wing panel onto the tubes,
remembering to guide the servo lead into the
fuselage. Secure the wing panel then plug the servo
extensions together.
Section 5: Wing Installation
