Attach the EZ-Angle
TM
Tether (
OPTIONAL)
• The tether will come pre-assembled to the A-Frame.
• Unfold the adjustable tether and clip it to the U-Bar on the underside of the Table Bed
(Figure 24).
• The EZ-Angle
TM
Tether features color coded angle markers to assist in finding your
preferred pre-set angle of rotation:
20°
/ Gentle Inversion
Green stripe must show in the center of the sliding buckle.
40°
/ Moderate Inversion
Orange stripe must show in the center of the sliding buckle.
60°
/ Advanced Inversion
Red stripe must show in the center of the sliding buckle.
90°
/ Full Inversion
Remove the carabineer from U-Bar to enable rotation to full inversion.
Attach the Head Pillow
(OPTIONAL)
• Attach the Head Pillow by securing the Velcro Straps through the holes in the Table Bed
(Figure 25). The position of the pillow can be adjusted depending on the user.
STEP 7 Attach the Accessories
16
FIGURE 24
FIGURE 25
