Handy Dryers gorillo ultra, Руководство пользователя

Страница: 9 / 12

Use a single-phase alternating rated voltage supply
(Not to be used with a power supply exceeding ±10%)
Use a power cord between 2mm
2
and 2.5mm
2
thick
(A voltage drop is possible if longer than 11m, so we recommend using 2 .5mm
2
cable)
Wire the unit
Embed a backbox in the installation location (1 switchbox no cover)
• If no backbox is used the power cord may prevent
the unit from sitting flush against the wall
Attach the installation panel to the wall using the 5 screws supplied
• If the wall is concrete, use metal screw plugs
(raw plugs etc)
• If the wall is not concrete, reinforce it prior
to installation
• Place the drilling template onto the wall
and drill holes
• Place rawplugs into the holes and screw
on mounting plate as shown
1 Remove the drain tank and air filter 2 Remove electric cover and power cords
i Unscrew the 2 screws on the electric cover
and remove lid
ii Unscrew the 2 screws on the pressure line cover,
loosen the 3 screws on terminal box, then pull out
the power line
9
INSTALLATION
Power cord
(with earth)
400mm
1
3
2
Drilling
template
Switchbox
Security
screw holes
Installation
screws
Installation
panel
870–890m
m
870–890m
m
615mm
130mm
Drain tank
Terminal box
Pressure line
cover
Electric cover
Power cords
Air filter
Drain tank
Terminal box
Pressure line
cover
Electric cover
Power cords
Air filter