Handy Dryers gorillo ultra Скачать руководство пользователя страница 8

There are locations unsuitable for this unit.  

DO NOT install in the following types of location:

 

• Where the temperature can be below -10°C or above 40°C

 

• Where the unit may come into direct contact with water

 

• If the unit will be in direct or strong sunlight

 

• If there is a lot of condensation in the environment

 

• If there are corrosive, neutral or reductive gases present

 

• 20m or more below, or 2000m or higher than, sea level

Installation location considerations:

 

•   Install the unit in a position where the unit will be easy to use . 

Note that if the unit is installed too low it may get wet when the floor is cleaned

 

•  Ensure there is at least 150mm clear space below the machine  

(either to the floor or other objects in the location)

 

•  It is recommended that a minimum distance of100mm should  

be left clear to either side of the unit

 

• Avoid locations where people or doors might damage the unit

 

• Choose a completely flat wall surface to mount the unit to

Spur location:

 

•   Connect directly to fused spur, ensuring spur is at least 300mm away from the machine  

(never directly above or below the unit)

PRE-INSTALLATION PRECAUTIONS

8

Fixed screws

Unit

Safety screws

Drain tank

Power switch

Installation panel

Installation panel

Recommended 
installation heights

945mm (for gents)
925mm (for ladies)

Terminal box

Air filter

630mm

Distance between the
terminal box without
cover and ground

Содержание gorillo ultra













Отзывы: