Image your vision
Put the moisturized KT board under the printhead tray, then roll the Z-directional screw lead
manually, making the carriage lowing down till the two surface adhere to each other.
( slightly contact is right, avoid pressing too hard )
Turn off the valves and disconnect the cable terminal of the air pump.
Turn off the main circuit breaker.
4.3 Printhead preservation during long vacation
When the printer stays non-working over 3-day or even longer vacation, the printhead will
need to be cleaned and flushed. Follow the instructions below.
Press the scram stop and shutdown the computer, turn off all the circuit breakers.
Turn off all the valves of the subtank and disconnect all the terminals of the air pump.
Unscrew the joint of the disk filter and use a syringe to get rid of all the ink within the
printhead. Avoid excessive pressure onto the printhead or it would cause damage to the
internal components. Slightly doing this till you see constant ink droplets come out of the
nozzles.
Use a clean syringe to flush the head with specific flushing till you see the liquid comes out
of the nozzle becomes transparent.
Keep some flushing remained in the printhead and preserve the heads as the instruction
described above.
5. Replacement of consumable parts
5.1 The replacement of UV lamp
Replace when the lamp is broken or can not light regularly.
Replacement instructions
Step one. Turn off the UV lamp activating button and UV power circuit breaker.
Step two. Disconnect the plug of the UV power cable and the fans cables. Illustrated as
below.
30
