Image your vision
Use the lever type grease gun to eject the lubricating grease into the slide block via the
lubricating nipple assembly on the block.
Non-clean lithium grease must avoid to be used for lubrication job or it will result in slide
way and slide block damage.
The moving parts need to be under good maintenance includes X-directional slide way,
Y-directional slide way, Y-directional screw leads, Z-directional screw lead.
3. Precision part maintenance
All precision parts must be strictly cleaned with isopropanol and lint-free tissue according to
the maintenance instructions.
The precision parts needs to be under good maintenance includes encoder strip,
opt-electric sensor, head height finder assembly.
4. Printhead maintenance
4.1 Daily routine maintenance
Every day before or after work, take a nozzle checking print and see if there is any
blockage. Execute priming or flushing immediately as soon as any blockage is observed.
Tidy and clean the printing platform and the bottom of the printhead tray.
On the occasion of only one or two color discharging during the printing process, a
synchronic color bar printed with the image is strongly recommended, so that all the other
colors can also discharge in the whole process. Thus avoid constant reflective UV light
causes the non-discharging nozzles clog.
Execute anti-dust and anti-electrostatic operation if necessary.
Double-check the smoothness of the media when placed on the platform so as to avoid
head strike incidents.
4.2 Printhead preservation during power failure
If ever encountered with a power failure, and you have no idea of when there will be supply
again, the printhead preservation needs to be done. Follow the instructions below.
Preservation instructions
Get a KT board the size of the printhead tray and wrap it with preservation film.
Carefully lay some lint-free tissue on the surface and use some flushing to moisture it.
29
