H&S TF6128, Руководство по эксплуатации

Страница: 35 / 52

-33-
Tine Bar Bearing
Tine bar bearings should be inspected annually for wear and replace when there is 3/16” of movement on
the tine bar. The 2 piece design of the tine bar baring allows them to be easily changes with out removing
the tine bar.
ANNUAL SERVICE
Cam Bearings
Depending on the acres per year, and field conditions,
the cam bearing should be inspected annually for wear
and replaced when the outer bearing surface no longer
has a taper and has become flat. Cam bearing can be
replaced with out removing the the tine bar by using
the access port designed into the center drive gearbox.
SERVICE
Cross Conveyor Belts
The cross conveyor belts should all be removed at the
end of each season and the inner frame work thoroughly
cleaned of build-up and debris. This will ensure proper
operation the next season.
Remote Filter
The remote filter system filters any particles that come from the tractor hydraulic system. The right-hand
picture shows removal of one of the filters for cleaning. A allen style wrench is used for removing the plug.