H&S LW1100, Руководство оператора

Страница: 27 / 40

-25-
The LINEWRAP has been designed to easily add a remote control option. The
remote control allows the operator to start and stop the wrapping process - IT DOES
NOT OPERATE THE START/STOP FUNCTION OF THE ENGINE. The remote
option may be added by bolting the remote box next to the main control box and
connecting the four pin remote connecting cord from the remote box to the main
control box. With this remote option, the LINEWRAP may be started or stopped
remotely from the tractor or skid-steer by use of the hand held activator. In order for
the remote to operate, the mode switch on the control box must be put in the
remote position. This will deactivate the start bar that would normally start the
wrapping process in the automatic mode. By deactivating the start bar, the
operator may set a bale on the machine without activating the wrapping process.
ELECTRIC-OVER-HYDRAULIC STEER CONTROL
The optional Electric-Over-Hydraulic Control can easily be installed to allow the operator to steer the
LINEWRAP from the tractor or skid steer. To operate, simply push the right or left button on the hand
held activator. The front indicator shows the operator where the tires are pointed. The Hydraulic Steering
Control was designed to work while the machine is not wrapping. The Hydraulic Steering Control
automatically includes the remote start/stop option. (See optional remote section).
REMOTE CONTROL
OPTIONAL EQUIPMENT
LIGHT KIT
Two LED lights and a switch are included in the optional kit for night wrapping.
SQUARE BALE RISER SHELF
An optional square bale riser shelf is needed for wrapping square bales in the lengthwise position.