H&S AUTOSHOT HSG130, Руководство оператора

Страница: 13 / 19

OPERATION
11
§4 Operation
§4.1 Layout for the front and rear panel
1. Alarm Led: Illuminated in over or under LINE voltage or over heated condition.
2. Power Led: Power led is illuminated when LINE power is in machine.
3. Wire speed knob: Adjusts the feeder speed of the welding wire.
4. Welding volt knob: Adjusts the welding voltage & current
5. MIG gun input: Connection point for MIG welding torch
6. Work-Piece input
：
Connection point for the work piece cable.
7. Power switch: Controls the power supply (ON/OFF) to the machine.
8. Service cord: LINE service cord with 3-prong plug.
9. Fan: Moves cooling air into machine to extend duty cycle.
10. Gas inlet: Shield gas inlet connection fitting.