GB
69
Heat deflector
The heat deflector is removed by lifting the front
edge and then pulling it out slightly. Lower it
so that it is below the insert and then withdraw
it. Assembly takes place in the reverse order.
Ensure that the rear lugs are secured in the slits
on the upper leg as illustrated above.
Self-closing hatch
The stove has a spring to close the hatch automatically.
The spring is above the heat deflector. The closing force
of the hatch can be adjusted by moving the spring between
the three notches on the lever. After adjustment, the heat
deflector must be reinstalled. The angle of the stove also
affects the closing force of the spring.
If the spring force seems weak
despite the spring being mounted at
the end of the lever, the angle of the
stove should be checked.
Type plates
Two type plates are supplied with
the stove. One for the insert and
one for the surround kit.
Place these plates on the lower
heat deflector as illustrated. On
the model with the drawer, the
type plates can be mounted inside
the drawer.
