Handife N1F-260E/20, Руководство пользователя

Страница: 13 / 68

The vibration value changes according to the area of application of the electric equipment and
may exceed the specified value in exceptional circumstances.
Important.
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adapt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
Reduce noise generation and vibration to a minimum!
Push the guard hood in the direction of the arrow onto the motor housing as shown in Fig. 2. Make
sure that it latches in place correctly!
5.1 Fitting the safety hood (Fig. 2)
Fitting both ends of the edge guide into the lashing eye of the moto shell as shown in Fig 3.
5.2 Fitting the edge guide (Fig. 3)
Undo the securing screw on the additional handle until it can be moved forwards and backwards
without any great resistance. Set the required position and tighten the securing screw again.
5.3 Adjusting the additional handle (Fig. 4)
Undo the union nut until the grass trimmer handle can be moved in and out freely. Now set the
required working height (Fig. 5) and secure the handle in this position by tightening the union nut
again.
5.4 Height adjustment (Fig. 5)
Fix the support onto the tube,and secure the support on correct position by tightening the union
nut .
5.5 Assembly support wheel (Fig. 6)
Press the button for the angle of tilt adjustment. Now you can set the long handle to the required
tilt. Release the button and allow the handle to lock into position to fi x the angle of tilt. Three
different locking angles are possible.
5.6 Adjusting the angle of tilt of the guide handle (Fig. 7)
5. Before putting into operation
EN-7