Handicare SystemRoMedic RiseAtlas450 Скачать руководство пользователя | Manualshive

Страница: 6 / 48

background image

2. Installation, assembly, inspection, service and maintenance of
RiseAtlas by technicians.

2.1 Basic product safety

Installation, assembly, inspection, service and maintenance of RiseAtlas must be done by authorized personnel in
accordance with instructions provided by Handicare AB.
An authorized person (service technician, inspector etc.) shall be trained by Handicare (or Handicare distributor) and shall
be well acquainted with the design, use and care of the lift.

Upon receiving and unpacking of product or parts, ensure that:

•

Content of package is in accordance with table of contents.

•

Inspect that there are no signs of damage on product.

•

Always read the manual and it is essential with thorough understanding of product.

•

Manuals and manual emergency lowering key are readily accessible near the product.

2.2 Installation or assembly

Installation or assembly of products shall be performed by authorized personnel if not stated otherwise in accompanying
instructions. Installation or assembly must be done in accordance with instructions provided by Handicare AB.

•

The product or accessory shall only be used on approved Handicare equipment.

•

Remove any transportation devices before installation, e.g. emergency stop clip.

•

Person responsible for installation or assembly shall document the procedure in the product logbook.

•

Ensure that product is installed in a safe environment with absence of water, strong power sources and

flammable material.

First-time installation or first-time assembly shall be followed up by a first-time inspection.

Many products require first-time charging procedure, read charging chapter in attached manual.

2.3 Inspection

Inspection of RiseAtlas shall be performed by authorized personnel and inspections are to be made at the following
scenarios.

•

First-time inspection – inspection that shall be performed when first-time installation or first-time assembly

has been made to equipment.

•

Periodic inspection – inspection that is performed annually at least every year on the equipment.

•

Verification inspection – inspection to be performed when essential spare parts has been changed.

6

S E R V I C E M A N U A L System

RoMedic

TM

«
...
4
5
6
7
8
...
»

Содержание SystemRoMedic RiseAtlas450

















































Отзывы:

Нет отзывов

Похожие инструкции для SystemRoMedic RiseAtlas450

Бренд: Olympus Страницы: 86

Бренд: Gaspardo Страницы: 196

Бренд: RAB Страницы: 2

Бренд: Hacker Страницы: 2

Бренд: J.P. SELECTA Страницы: 8

Бренд: Haemonetics Страницы: 134

Бренд: Hadeco Страницы: 72

Бренд: EuroLite Страницы: 28

Бренд: Malekko Страницы: 2

Бренд: Major Страницы: 26

Бренд: PASCO Страницы: 30

Бренд: XanLite Страницы: 4

Бренд: XFit Страницы: 16

BlackBox Series

Бренд: Nakamichi Страницы: 23

Бренд: Harken Страницы: 4

Бренд: A&D Страницы: 33

GPSMAP 9 3 Series

Бренд: Garmin Страницы: 222

Бренд: Otto Bock Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды