Handicare Sedeo Lite Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 68

Handicare Sedeo Lite Скачать руководство пользователя страница 34

34 | Safety

2 Safety

Warning!
Always follow the instructions given next to
the warning symbols! Failure to follow these
instructions may result in physical injury,
damage to the wheelchair or damage to the
environment. Where possible the warning
symbols have been placed in the applicable
paragraphs.

Be carefull when swing away/fl ip up parts.
Contact with moving parts should be avoided.

Caution!
Parts of the wheelchair that are intended, for
service or repair, to be removed without the
use of tools (e.g. armrest, legrest) can have
an adverse effect on the support of the user if
they are missing or not placed back in the right
position.

2.1 Temperature

Warning!
Avoid exposing the wheelchair to direct sunlight
for extended periods of time. Some parts of the
wheelchair, such as the seat, the backrest and
the armrests assembly, complete, can become
hot if exposed to the sun for too long. This may
cause burns or skin irritation.

2.2 Indications on the seating

system

The wheelchair must not be lifted
up by the armrests assembly,
complete and/or legrests.

The stability of the wheelchair is
infl uenced by the adjustment of the
seating system's centre of gravity.
Such adjustments should be made
by professionals only.

«
...
32
33
34
35
36
...
»

Содержание Sedeo Lite





































































Отзывы:

Нет отзывов