manualshive.com logo in svg

Handicare Legend 2 Exigo, Руководство пользователя

Поделиться
Скачать
Handicare Legend 2 Exigo Скачать руководство пользователя страница 28

28

MB3151-CA

Warranty Legend 2 Exigo - Canada

Handicare warrants to the original buyer that the new equipment sold by an 
authorized Handicare dealer is, at the time of delivery to the buyer and for the 
defined time periods (found below) following such delivery, free from defects in 
material and workmanship and meets designed performance levels.  Handicare 
agrees that, during the defined time periods, it will either repair or replace, at 
Handicare’s sole option, any part or parts of new equipment which under proper 
and normal conditions of use proves to be defective or fails to meet designed 
performance levels. 

The warranty time periods for various components of the Legend 2 Exigo are 
defined as follows:

Component

Warranty Period

Side frames and cross braces

Lifetime to the original purchaser

All Components, options and mechanical parts

12 months

Exclusions and Limitations

•  Equipment modified other than by Handicare is not covered by this warranty.

•  Tires, arm pads, and all padded upholstered components are considered wear 

items and are not covered by this warranty.

•  Cosmetic appearance of items will change as a result of use and are not 

covered by this warranty.

•  Items added to the equipment by the buyer or by a user are not covered by this 

warranty.

•  Any damage to items added to the Handicare supplied equipment, caused 

by the Handicare supplied equipment, is not covered under this warranty. Any 
damage to the Handicare supplied equipment by the additional equipment is 
also not covered by this warranty.

•  Any use of the equipment outside the criteria published in the current 

Handicare sales brochures, or beyond the manner, in which a prudent person 
would normally use the equipment, will void this warranty (i.e. Abuse and 
misuse).

•  Labour and shipping are not covered by this warranty.

The foregoing warranty is exclusive and in lieu of all other express warranties. 
Implied warranties, if any, including but not limited to the implied warranties of 
merchantability and fitness for a particular purpose, shall not extend beyond the 
duration of the express warranty provided herein.  Handicare shall not be liable for 
any consequential or incidental damages whatsoever.

For all warranty inquiries, please contact your authorized Handicare dealer.

Содержание Legend 2 Exigo

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды