manualshive.com logo in svg

Handicare Legend 2 Exigo, Руководство пользователя

Поделиться
Скачать
Handicare Legend 2 Exigo Скачать руководство пользователя страница 20

20

MB3151-CA

Maintenance

Maintenance described in this section can be carried out by the user. 
Other maintenance work should be carried out by qualified personnel at an 
authorized Handicare dealer.

Washing the frame

The frame should be washed regularly with warm soapy water. If the frame is 
very dirty, a degreasing agent may be used. The frame may be washed with 
a high-pressure hose. If you use this method, avoid directly spraying the ball 
bearings. Dry the wheelchair well after washing it or after it has been used in 
rainy conditions. If a degreasing agent is used, moving parts should be greased 
afterwards.

Cleaning the seat and backrest covers

The upholstery and backrest cover can be washed in a washing machine at 60 °C. 
See the washing instructions on the various textiles.

Conditions which could damage the wheelchair

The chair should not be used at temperatures below -35 °C or over 60 °C. No 
specific requirements are made in connection with humidity or air pressure. No 
further requirements are made regarding storage conditions.

Содержание Legend 2 Exigo

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды