Handicare IBIS XC, Руководство по обслуживанию

Страница: 22 / 78

Technical specifications
Version 2008v2 22
2.3 Electrical wiring diagram of the XP
2.4 Error codes of the XP fault table
Check the malfunction/signal with the aid of the following list.
Flash Description
1 User Fault Possible stall timeout or user error
2 Battery Fault Check the batteries & cabling
3 Left Motor Fault Check the left motor connections & cabling
4 Right Motor Fault Check the right motor connections & cabling
5 Left Parking Brake Fault Check the left parking brake connections & cabling
6 Right Parking Brake Fault Check the right parking brake connections & cabling
7 SHARK Control Unit Fault Check the SHARK Communications Bus
8 SHARK Power Module Fault Check the SHARK connections & wiring
9 SHARK Communications Fault Check the SHARK connections & wiring
10 Unknown Fault Check all connections & wiring
11 Incompatible Control Unit Wrong type of Control Unit Connected
2.5 Fully discharged PowerSupport
Normally the PowerSupport starts charging when the charger is connected. If this does not happen, the
PowerSupport may be fully discharged. To activate the PowerSupport external voltage is needed. The motor can
serve as a source for this. Connect the charger and turn the wheel calmly round. Increase speed slowly until the
led lights flashes on the control unit. Because the charger is already connected, the PowerSupport will start
charging. Please note: the PowerSupport must be fully charged.
Please feel free to contact one of our service engineers if you have any further questions.