Handicare IBIS XC, Руководство по обслуживанию

Страница: 13 / 78

Maintenance
Version 2008v2 13
1.4.10 Replacing the controller of the Ibis XC Power
Support (option)
Replace the controller as follows:
•
Cut the Ty-Raps that hold the cable.
•
Loosen three cross-head screws (A).
Remove the controller.
Fit a new controller in the reverse order.
1.5 Replacement and repair activities for the Ibis XP
1.5.1 Replacing the driven wheel
Replace a driven wheel as follows:
•
Support the wheelchair in such a way that the wheel is
elevated.
•
Loosen cross-head screw (A).
•
Remove protective cover (B).
•
Loosen hexagonal bolt (C) with a 17 mm box spanner.
•
Pull wheel (D) off the axle (E).
Fit a new wheel in the reverse order.
1.5.2 Repairing the tyre of the rear wheel
See below: ‘Replacement and repair activities for the Ibis XC’.
1.5.3 Replacing the tyre of the rear wheel
See below: ‘Replacement and repair activities for the Ibis XC’.
1.5.4 Replacing the motor
Replace the motor as follows:
Step 1:
•
Loosen the star knobs (A).
•
Remove battery cover (B).
•
Remove fuses (C).
Step 2:
•
Disconnect the motor cable from power module (D).
B
A
A
E
B
C
D
D
C
A
A
B