handi quilter MY SECRET DRAWER, Руководство по сборке

Страница: 5 / 20

Page 4 My Secret Drawer Assembly Instructions
Section 2: Drawer Sides to Drawer Rear Assembly
Step 1: Locate the two drawer sides (item 1) and
the drawer rear (item 2).
Step 2: Orient the drawer sides so the bend at the
top of the drawer along with the drawer
slide face the outside. The bends at the
front and rear end of the drawer will face
the inside.
Step 3: Orient the drawer rear so the top lip is
to the outside and the bottom bend is to
the inside.
Â
IMPORTANT: Ensure that the bent end of
the drawer slide is to the front and the open
end of the drawer slide is to the rear on
both drawer sides before proceeding.
Step 4: Place the rear of the drawer down over the
location tab at the rear of each drawer side.
Step 5: Insert an M4 X 8mm screw (item 3) through
the drawer side (item 1) and drawer rear
(item 2) at both the top and bottom. Place a
M4 serrated flanged nut on the two screws.
ITEM PART # DESCRIPTION QTY
1 HG01400-02 DRAWER SIDE 2
2 HQ01400-03 DRAWER REAR-4 FOOT 1
3 HG01400-17 SCREW-M4 X 8MM SKB ZN 4
4 QM10528 NUT M4 SERRATED FLANGE 4
1
4
3
2
Step 6: Repeat Step 5 for the other drawer side.
Â
IMPORTANT: Leave all screws loose until the
drawer is fully assembled and instructed to
tighten them.
Â
IMPORTANT: Bent end of
drawer slide goes to the front,
open end of drawer slide goes
to the rear.