handi quilter MY SECRET DRAWER, Руководство по сборке

Страница: 11 / 20

Page 10 My Secret Drawer Assembly Instructions
Step 1: Stand the drawer up on the back of the drawer.
Orient the drawer so you have the inside of the
drawer and drawer bottom accessible to you.
Step 2: Pull the bottom drawer brace away from the
wood as far as possible.
Step 3: Pull the four red tabs created in Section 4, Step 2
to remove the red tape to expose the sticky tape
on the drawer brace.
Step 4: Push the brace on the screws towards the wood.
Using your hands, apply firm pressure from the
inside of the drawer and on the brace to ensure a
strong bond.
Step 5: Tighten the two screws inside the drawer at the
center of each side into the bottom drawer brace
firmly with the 2.5 hex driver (provided).
Section 6: Tightening Center Bottom Drawer Brace Screws and Sticky Tape
Tighten the two brace screws on
each side of the drawer. Screws on
inside of drawer shown above.
Drawer Front
Drawer Back