4 |
www.HandiQuilter.com
December, 2019
Table and Leg Assembly
Parts Needed
1 - Table section
2 - Upper leg A
2 - Upper leg B
2 - Lower leg
4 - Leveling feet
20 - M8 x 20 mm socket button head
cap screws
4 - Nylon washers
2 - L-brackets
Tools Required
5 mm hex tool (provided)
17/13 mm wrench (provided)
Spirit level (optional, not provided)
1. Place the table section face down
onto a protective surface.
2. Attach the upper legs:
Position the
upper legs A and B so the height
adjustment holes face each other
across the short end of the table.
3. Attach each upper leg to the table
with four (4) M8 x 20 mm socket
button head cap screws (SBHCS)
through the upper corner leg
brackets into the holes on the
sides of the table.
Height
adjustment
holes
